Monday 15 August 2011

Using Flash tool to install .ftf files.


1. Install Flashtool.
2. Copy the *.ftf files that you `ve downloaded  to 'firmwares' folder from Flashtool.
3. Click "Flash" button from flashtool and select the *.ftf file firmware and click "OK"
4. Relax and wait a while. When the proccess is completed you will get a popup message. (don`t click on that!!!)
5. Unplug your USB cable from PC.
Power off your phone.
Press back button and keep your finger on button.
Plug USB cable to PC.
Check if the green LED appears.
On popup message press "OK" button.
When "Found at USB/........" appear on flash tool you may release "back button", sit down, relax and wait.





6. IF the "Start Flashing" message appear everything`s ok if not...repeat. Sitdown and relax.



7. When last message appear unplug/plug USB cable.
8.Restart Phone.
9.Done.:)



-original guide by Ricardo Rendeiro.

64 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Where do you get the .ftf files for w8 and flash tools that i got has only x10, x10 mini\pro, and x8 option in it which is not working..

    ReplyDelete
  3. I found the same problem. W8 dead seems to boot does not work .. is there another solution? after the Sony logo appears always restats again

    ReplyDelete
    Replies
    1. install pc companion and use repair phone option.

      Delete
  4. use "x8" as the option...both phones are similar...

    ReplyDelete
  5. n therez a link to ftf file in download section...

    ReplyDelete
  6. I'm stuck on pop up message... you said 'Check if the green LED appears.' but green LED not shown and no pop up message to click 'OK' . . hurm..

    ReplyDelete
  7. i'm not able to copy the 2 files (busybox & xrecovary.tar) into system/bin. there for the recovary mod is not appearing. plzzz help meee plzz

    ReplyDelete
  8. how to upgrade sony ericsson w8 2.1/2.3

    ReplyDelete
  9. I complete all steps without problem except when restart, it won't boot to home screen. Please help.

    ReplyDelete
  10. help me ! why it say

    08/039/2011 19:39:34 - ERROR - Error flashing. Aborted
    08/039/2011 19:39:34 - INFO - Now unplug the device and power it on
    08/039/2011 19:39:34 - INFO - Then go to application settings
    08/039/2011 19:39:34 - INFO - turn on Unknown Sources and Debugging
    08/039/2011 19:39:34 - INFO - Preparing files for flashing
    08/039/2011 19:39:35 - INFO - Searching Xperia....
    08/039/2011 19:39:36 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&214056EA&0&1
    08/039/2011 19:39:36 - INFO - Start Flashing
    08/040/2011 19:40:41 - INFO -
    08/040/2011 19:40:41 - INFO - Flashing loader
    08/040/2011 19:40:41 - ERROR - Error flashing. Aborted
    08/040/2011 19:40:41 - INFO - Now unplug the device and power it on
    08/040/2011 19:40:41 - INFO - Then go to application settings
    08/040/2011 19:40:41 - INFO - turn on Unknown Sources and Debugging
    08/040/2011 19:40:41 - INFO - Preparing files for flashing
    08/040/2011 19:40:42 - INFO - Searching Xperia....
    08/040/2011 19:40:43 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&214056EA&0&1
    08/040/2011 19:40:43 - INFO - Start Flashing


    EROR FLASHING

    ReplyDelete
  11. Why it say Error Flashing. Aborted?

    Please help me !!!!

    ReplyDelete
    Replies
    1. its very simple ...
      LISTEN CAREFULLY TO ME..
      DONT SWICH ON UR PHONE BEFORE
      FLASHING ...JUST ONLY PRESS
      BACK KEY AND CONNECT WITH USB U
      WILL SEE FLASHING STARTED...
      I ALSO FACED THIS PROB LIKE U!

      Delete
    2. both types i try but not woking pless hel me

      Delete
  12. Followed all your instructions, it worked great, I had tried to install MiniCM7 on to a Sony W8, got bricked, now its working fine as X8, atleast its started, thats great, many thanks to you.

    ReplyDelete
  13. succcessfully flashed my w8 as x8!!!
    just followed the steps above.....
    thanks for this blog

    ReplyDelete
  14. I GET STUCK AT THE POP UP MESSAGE BUT THE GREEN LIGHT HAS COME UP......
    NO "OK" BUTTON ON THE POP UP MESSAGE IS SHOWN....
    HOW DO I PROCEED ????
    PLEASE HELP ME..
    DESPERATE,

    ReplyDelete
    Replies
    1. its very simple ...
      LISTEN CAREFULLY TO ME..
      DONT SWICH ON UR PHONE BEFORE
      FLASHING ...JUST ONLY PRESS
      BACK KEY AND CONNECT WITH USB U
      WILL SEE FLASHING STARTED...
      I ALSO FACED THIS PROB LIKE U!

      Delete
  15. This comment has been removed by the author.

    ReplyDelete
  16. please send me a site to download Gingerbread ftf files.... :/
    can i install the V2.3 on my SE w8????
    help me

    ReplyDelete
    Replies
    1. yes 100%

      search gingerdx for x8/w8 on google!!!

      Delete
  17. i did bt i still have my w8 the same

    ReplyDelete
    Replies
    1. hey buddy i will help u all u need to recover your dead phone...!
      pls say what u do while flashing on flashtool..

      Delete
  18. hey everyone i followed this blog and succesfully recovered my bricked w8....
    very nice blog..!
    if anyone have problems contact me at
    *1 facebook (http://facebook.com/adas.ajt/)
    simply messege me about dat ur phone is bricked
    *2 u can also mail me (das.abhishek246@gmail.com)
    *3 u can sms me but dont send me spam sms plz (+91 8013540944)


    pls dnt remove my post...(to administrator)
    i want to help them who bricked their phone
    iam very active!!!

    ReplyDelete
  19. flashing complete but i start my phone kernel cant flash why ?????

    ReplyDelete
  20. ERROR - Error flashing. Aborted (PLIZ HELLPPPPP!!!!!)

    ReplyDelete
  21. flashing is completed but my phone is still not rebooting!!!
    pls help :\

    ReplyDelete
  22. I installed CM7_RC1_V4 rom in x8 but I cant get into recovery mode if I press back button while booting. so i copied busybox,chargemon and xrecovery from sd card to system path using root explorer. I gave full access(rrwwxx) for all the three then i restarted my phone, but it stuck's with the sony ericsson logo i tried by pressing back button repeatedly but it doesen't consider it. so i tried using flash tool(Flashtool\firmwares\X8_2.1.1.C.0.0._un.ftf) but it shows (Error flashing. Aborted) . I dono what to do pls help me on this.

    ReplyDelete
    Replies
    1. i flashed it again using flash tool, it works fine

      Delete
  23. wen the 1st time you tried, it must have installed the flash drivers...so..:o

    ReplyDelete
  24. my phone is dead when i tried to flashed it
    now, what am i gonna do???

    ReplyDelete
  25. can someone help me bout my w8 phone i dont what to do i change rom's and back to stock but the automatic touch is there without touching it...help me please!! thanks and advance... :(

    ReplyDelete
  26. where does the new baseband version go after downloading the file?!?!?!?!

    ReplyDelete
  27. search for w8 original rom and download it.

    ReplyDelete
  28. i can't do it on my e16i kernel

    ReplyDelete
  29. 27/009/2012 08:09:50 - INFO - Device connected with USB debugging off
    27/009/2012 08:09:50 - INFO - For 2011 devices line, be sure you are not in MTP mode
    27/010/2012 08:10:22 - INFO - Flash canceled
    27/013/2012 08:13:22 - INFO - Device disconnected



    Wt is MTP moode?
    How can I get rid of this problem?
    Pls help

    ReplyDelete
  30. 29/055/2013 00:55:35 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed" ,,,,,,,,,,,this error msg came

    ReplyDelete
  31. This comment has been removed by the author.

    ReplyDelete
  32. Can someone please send the FTF link for W8.

    ReplyDelete
  33. I am unable to open my w8 mobile as when was installed ICS after reboot my phone got stuck ..after opening it says SONY ERICSION and after that nothing is responding..even the clock word mod aswell..i tried flashing but that also doesn't helped me to restore.. please help me out in this step by step.. and ur quick response will b highly appreciated

    ReplyDelete
  34. 08/015/2013 21:15:12 - INFO - Searching Xperia....
    08/015/2013 21:15:12 - ERROR - USB\VID_0FCE&PID_ADDE\5&20D0F3FF&0&3
    08/015/2013 21:15:13 - INFO - Searching Xperia....
    08/015/2013 21:15:13 - ERROR - USB\VID_0FCE&PID_ADDE\5&20D0F3FF&0&3
    08/015/2013 21:15:14 - INFO - Searching Xperia....
    08/015/2013 21:15:14 - ERROR - USB\VID_0FCE&PID_ADDE\5&20D0F3FF&0&3

    Please HELP !!! XPERIA X8

    ReplyDelete
  35. thanks guys..
    your great!!!

    ReplyDelete
  36. when i plug the usb cable to my pc .... the pc hangs y

    ReplyDelete
  37. flashing kernel.sin still displayed cant move into next step y........??

    ReplyDelete
  38. hellolooo.... m not able to find ftf files of india region...pls help me ...
    my phone is dead

    ReplyDelete
  39. Links Updated! - Visit Downloads [ http://myw8.blogspot.in/p/downloads.html ].

    ReplyDelete
  40. pressing back key is not working. is there any solution?

    ReplyDelete
  41. hey..i successfully rooted my phone and istalled Gingerdx v022 .and it works prperly...than i tried to install Gingerdx v31-shakira.(install cutome rom from dcard) . it installed successfully.. but..when i reboot my w8 phone it stop at sony ericson logo...nothing happen..please help me..how to repair my phone..????

    ReplyDelete
  42. thank bro... it work nicely... my w8 already dead about two year coz root then i just follow ur introduction and it work like normal...

    ReplyDelete
  43. Stuck at logo...plz sumone help...

    ReplyDelete
  44. how to code decode sony e16i

    ReplyDelete
  45. Excellent Blog..and its very Effective,helpful to us...
    Ecommerce Web Design Company

    ReplyDelete
  46. Where link download X8_2.1_Sony Ericsson.ftf ????

    ReplyDelete
  47. http://www.4shared.com/rar/VwpfqJCCba/sony_e16i.html

    try this link full flash file & tool all friends

    ReplyDelete
  48. http://www.4shared.com/rar/VwpfqJCCba/sony_e16i.html

    try this link full flash file & tool all friends

    ReplyDelete
  49. I have downloaded the flash tool but it is asking user name and psswrd when I type the my id and psswrd it is not accepting

    ReplyDelete